اموزش نصب iptv در ایمیج Enigma 2 - فروش ایپی تیوی قدرتمند Arya IPTV

فروش ایپی تیوی قدرتمند Arya IPTV

خرید ایپی تیوی قدرتمند GET IPTV قوی ترین سرور IPTV در سطح ایران با بیش از 100,000 هزار کانال

اموزش نصب iptv در ایمیج Enigma 2

این اموزش نصب ایپی تیوی در رسیور های لینوکسی دریمباکس و انواع رسیورهای لینوکسی Enigma قابل استفاده است

اموزش راه اندازی ایپی تیوی روی رسیور های لینوکسی IPTV در Enigma 2 – Autoscript این اموزش برخلاف سایر اموزش های سایت به زبان اصلی ارایه میشود

از انجاییکه تمامی ایمیج های موجود به زبان انگلیسی است بهتر است برای درک بهتر مفاهیم زبان اموزش نیز انگلیسی ارایه شود تا مشترکین نصب اسانتری داشته باشد

قابل ذکر است جهت راه اندازی و نصب این پلاگین نیاز به یک سیستم لپتاپ یا کامپیوتر دسکتاپ دارید

مراحل نصب

ابتدا نرم افزار DCC از این لینک دانلود کنید

 

Step 1: Start by downloading the necessary items. DCC_E2 (Dreambox Control Center for Enigma2). You must connect to your Enigma box using Dreambox Control Center E2 and click on “Telenet“. But first, you must find the IP address of your enigma2 box. We will discuss this further ahead in this article.

Step 2: To connect, we need to know the box IP address, username, and password (username and password usually is root/root). Now about the IP, click Menu button on the remote controller. Go to Setting then Network Settings. You should see something like the below image:

Step 3: Once connected to your box via Dreambox Control Center, it`s time to execute the Autoscript command which should be provided by your IPTV provider. These scripts can be given in two versions:

– OE1.6 version which uses Python 2.6: It is advised to use this version on non-Dreambox receivers.

– OE2.0 version which uses Python 2.7: It is advised to use this version on Dreambox receivers.

So for our Dreambox of this example the command line should be like this:

wget -O /etc/enigma2/iptv.sh “http://tv.yourdns.com/get.php?username=your-line-username&password=your-line-password&type=enigma216_script&output=ts” && chmod 777 /etc/enigma2/iptv.sh && /etc/enigma2/iptv.sh

Copy/paste this command line on Telnet Terminal and hit enter.

Step 4: We suggest everyone to reboot the device once you execute the Autoscript command. To reboot the device just write “reboot” on Telnet terminal.

Step 5: After the Reboot, you will see on Bouquet list a new Group called “IPTV”.